Products

Construction maintenance/repair fabrication
PROCESS
Air plasma cutting and gouging
RATED INPUT
875: 208 or 230 V, 1 phase
875 Auto-Line: 208-575 V, 1-or 3-phase
RATED OUTPUT at 104°F (40°C)
875/875 Auto-Line: 1-phase: 60 A at 140 VDC,
208V: duty cycle, 230 V: 40% duty cycle
875 AUTO-LINE: 3-phase: 60 A at 140 VDC,
208 V: 40% duty cycle
230-380 V: 50% duty cycle
380-575 V: 60% duty cycle
SEE PAGE 2 FOR 100% DUTY CYCLE RATINGS
CUTTING CAPABILITY
Rated: 7/8 in. (22.2 mm)
Sever: 1-1/4 in. (32 mm)
SYSTEM WEIGHT
875: with 20 ft. torch: 49 lb. (22.2 kg)
with 50 ft.torch: 54 lb. (24.5 kg)
with 50 ft.torch: 63 lb. (28.6 kg)
875 AUTO-LINE WITH HAND-HELD TORCH
with 25 ft.torch: 54 lb. (24.5 kg)
with 50 ft.torch: 63 lb.(28.6 kg)
875 AUTO-LINE WITH MACHINE TORCH:
With 25 ft. torch: 56 lb. (25.4 kg)
with 50 ft.torch: 63 lb. (28.6 kg)
REQUIRED IPUT PRESSURE/FLOW
6.75 cfm (191 L/min). At 90 psi minimum (621 kPa), 120 psi maximum (828 kpa)

875 AUTO-LINE™ unit automatically connects to any primary input voltage from 208-575 volts single-or three-phase, 50 or 60 Hz.
LVC™ LINE VOLTAGE COMPENSTION provides peak performance power under variable conditions (power fluctuations up to ±15 percent) for steady cuts and cleaner ending cuts.
CONSUMABLES STROGE COMPARTMENT provides convenient access to consumables and parts.
HEAVY-DUTY WORK CLAMP with flexible cable and quick connect.
WIND TUNNEL TECHNOLOGY™ prevents abrasive dust and particles from damaging internal components.
FAN-ON-DEMAND™ cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airbone dust/dirt pulled through the unit.
AUTO POSTFLOW calcurates the length of postflow time based on the amount of cutting time to optimize consumable life and eliminate excessive air usage.
CAN BE POWERED BY MILLER ENGINE DRIVES WITH GENERATOR POWER. See page 2 for engine drive compatibility and recommended settings.

Would like to order?

Please fill this form and we will contact you immediately