Tsurumi Submersible Sewage Pump 50 UT2.75
Brand: Tsurumi
Applications |
• Transferring wastewater between the tanks at small-scale treatment facility. |
• Draininsewage from factory, residence, hotel, restaurant, etc. |
• Pumping rainwater and springwater at a place where solid matters are likely to run into the water. |
Features |
Anti-wicking cable Entry |
AN anti-wicking block is provided at the cable entry section of the motor chamber. Even if the cable jacket becomes damaged or the tip of the cable is accidentally immersed in water, this device prevents water from traveling into the motor chamber throught capillary action. |
Motor protector |
A built-in thermal motor protection device reacts to the heat caused by overcurrent or run-dry conditions. It not only cuts off the motor circuit automatically but also resets by itself. When the motor cools down to a safe operating temperature, the motor restarts. |
Dual inside mechanical seal |
The dual inside mechanical seal (dual face mechanical seal located in an bath) is incorporated in all pumps. As both upper and lower sealing faces are lubricated by the oil only, it ensures a longer life of the product and a stable sealing effect. |
Oil Lifter (patented) |
The oil lifter is a lubricating device that forcibly lubricates the mechanical seal. It further stabilizes the functions of the mechanical seal and extends the life expectancy of the seal and also the inspection term. |
motor protector mm |
40 |
50 |
|||
Pumping Fluid |
Type of fluid |
Sewage, wastewater, and Liquid carrying waste and solid matters |
|||
Fluid Temperature |
0 to 40°C |
||||
Pump |
Structure |
Impeller |
Vortex |
||
Shaft seal |
Double mechanical seal (with oil lifter) |
||||
Bearing |
Double - shielded ball bearing |
||||
Materials |
Impeller |
Glass-fiber reinforced resin |
|||
Casing |
Gray cast iron |
||||
Shaft seal |
siC |
||||
Motor |
Type, Pole |
Dry Type submersible Induction motor, 2-pole |
|||
Insulation |
Class E |
||||
Phase |
Single-phase (suffix "S") Three-phase |
||||
Starting method |
Capacitor Run (Single-phase only) Direct on line |
||||
Protection Device (Built-in) |
Circle Thermal protector miniature thermal protector (0.25 and 0.4kW of single-phase) |
||||
Lubricant |
Turbine oil (ISO VG32) |
||||
Matrials |
Frame |
Gray cast iron |
|||
Shaft |
403 stainless steel |
||||
Cable |
PVC |
||||
Discharge connection |
Screwed flange |